Key Highlights
- Most hospitals run 3-4 EHR training tools — the real question is which handles which job.
- Training quality predicts EHR experience more than vendor or IT spend: poorly trained physicians were 3.5x likelier to say the EHR hurt care (KLAS, 72,000+ clinicians).
- Every tool has a hidden cost — clinician time, IT labour, stale screenshots, or super users who leave at go-live.
- Object-based simulation cuts update effort and PHI risk: CHU Montpellier went from 3 hours to 40 minutes; Zuyderland halved classroom time.
- Simulation won’t replace everything — keep a real environment, classrooms, and super users. Match each workflow to the right tool.
Introduction
Most hospitals already own three or four ways to train staff on an EHR. The real question is which one should handle which job.
Sit with a group of clinicians for ten minutes and the complaints about their EHR will start on their own. Too many clicks. Alerts nobody asked for. A screen that moved after the last upgrade.
So you’d assume the software is the main problem. KLAS Arch Collaborative researchers surveyed more than 72,000 clinicians at over 150 hospitals and health systems, and they found something else: how people rated their EHR training predicted their experience better than anything else they measured, including which vendor the hospital had picked and how much it spent on IT.
If you run training at a health system, that’s flattering for about a minute. Then you remember you’ve got thousands of people to reach, and most of them can’t step away from patients.
Hospitals usually handle this with a patchwork. There’s some classroom time, a training environment, a folder of screenshots and videos, and a few super users on the floor at go-live. Plenty of that works, and we’ll say where it does. We’ll also show where Assima’s systems training platform fits better, and where it doesn’t.
Why This Decision Deserves More Attention
Two nurses on the same unit, on the same build, can have completely different days. One flies through admission documentation. The other is hunting for a field and quietly writing things on a scrap of paper to enter later. Nobody can change the software that afternoon, but a training team can do a lot about that second nurse.
The stakes go beyond frustration. In the same KLAS research, physicians who said their training was poor were more than 3.5 times as likely to report that the EHR didn’t let them deliver quality care. We’d take that one to the board before we took any satisfaction score.
The hour you’re asking for isn’t free
Someone covers every hour a nurse spends in training. Maybe that’s a float nurse. Maybe it’s overtime, or a tired clinician giving up a day off, which tends to go over badly.
Generic content burns through that goodwill fastest. A cardiology nurse and a registration clerk live in very different corners of the same system, and neither wants to sit through the other’s workflows. So when you look at any training tool, we’d start with one blunt question: can a specific role practice its own work on it, in the little time you’ve got, and will the content still be accurate two upgrades from now?
What’s Usually in the Toolkit
Four tools show up in nearly every hospital, usually at the same time. None of them is bad. They just break in different places.
Classroom training
A good instructor is hard to beat. People can ask questions, grumble together, and hear why the change is happening. The trouble is logistics. Try booking a room full of ICU nurses on a Tuesday. On a big rollout, sessions can stretch over months, so the first groups may have forgotten half of it by the time they log in for real. And any class moves too fast for some people while others check their phones.
Training environments and playgrounds
This is a working copy of the EHR, loaded with fictional patients. Staff get the actual build, which no slide deck can offer, and they can poke around to see what happens.
The cost shows up on the IT side. Somebody builds it, refreshes the data, and keeps it in step with production, and that work never really ends. Assima estimates that maintaining one can run from tens of thousands to hundreds of thousands of dollars a year. Freedom has a downside for learners, too. Drop a new hire into a playground to practice a task they’ve never seen and they may just wander around for twenty minutes.
Screenshots, videos, and static e-learning
These are cheap to start and easy to push through an LMS, and a nurse can watch one on a break. Fine for orientation. But nobody learned to chart by watching someone else chart.
Maintenance is the quiet killer here. One changed button can mean retaking a whole set of screens, and every capture needs a check for patient information before it goes anywhere.
At-the-elbow support
On a rough first shift, a colleague who knows the system is worth more than any course we could sell you. We mean that. The catch is that good super users are always in demand, the night shift rarely gets the best of them, and the support mostly leaves when the command center closes.
eed a plan that works around clinical schedules and holds up after go-live?
What Assima Does Differently
Assima works from your live application. Its patented cloning technology captures a process and turns it into an interactive copy of the interface, so learners aren’t clicking through pictures. They scroll, open dropdowns, and type into fields the way they would at the workstation, and the lesson keeps them on the workflow you meant to teach.
Screens you can edit
This is the part training teams tend to care about most. Captured screens are made of editable objects, so when a field moves or a menu changes, an author can fix it without recording the process again.
You can also build before the production environment is done. Anyone who’s watched a go-live date hold steady while the build kept shifting will see why that helps.
Patient data stays out of it
Capture only picks up user interface objects. It doesn’t touch your source code or database. Authors can then swap sensitive data across lessons in a few clicks, instead of hunting through hundreds of screens, and staff never practice production.
You can see where people get stuck
A completion report tells you who finished. It won’t tell you that half of your night-shift nurses keep failing at the same step in discharge. Assima tracks activity down to each click and input field, so an educator can catch that kind of pattern before go-live. Lessons publish through SCORM to the LMS you already run, so nobody has to rip anything out.
Head-to-Head: Assima vs Traditional Tools
Here’s the short version. These ratings are our judgment of how each tool typically performs, not a measured benchmark, and your setup could easily change a few of them. Notice that Assima doesn’t take every row.
Healthcare Training Tools Compared
Criterion | Classroom | Training environment | Static e-learning | Assima simulation |
Hands-on practice | Varies: Depends on lab time | Strong: Real build, open practice | Limited: Mostly watching | Strong: Guided, interactive practice |
PHI exposure | Varies: Depends on demo data | Low: Fictional patients | Varies: Each capture needs checks | Low: Anonymized across lessons |
Time away from care | High: Fixed sessions | Medium: Often scheduled labs | Low: On demand | Low: On demand |
Upkeep after upgrades | Medium: Revise decks and trainers | High: Refresh and align data | High: Recapture affected screens | Low: Edit objects in place |
Readiness data | Varies: Attendance, instructor view | Varies: Needs manual assessment | Limited: Completion and quizzes | Strong: Click-level tracking |
Testing the real build | Limited: Demonstration only | Strong: Runs the actual configuration | None: Recorded screens | None: Captures the interface only |
Realism
Training environments and simulation both leave passive formats behind here, and the difference between them comes down to guardrails. A new nurse learning medication documentation usually wants to be walked through it. A physician tuning their own preferences would rather be left alone. You probably have both.
Clinician time
Classroom training loses this one, and CHU Montpellier shows by how much. The French university hospital needed to take annual training capacity for its DxCare patient record from 100 people to several thousand. It swapped three hours of classroom time for 40 minutes of distance learning, trained more than 2,300 employees at once, and watched support calls drop.
Mixing formats
You don’t have to pick a side. Zuyderland MC in the Netherlands had 2,500 nurses to train on SAP, so it asked them to finish simulation exercises before class. Instructors could then spend the session on questions. Classroom time per nurse went from seven days to three and a half.
Keeping content current
Go-live feels like the finish line, but it’s where the maintenance bill starts. Upgrades arrive. Policies change. Every one of those can quietly break a screenshot or a script. With editable objects you fix what changed and leave the rest alone, and the savings grow with every role and language you support.
Consistency across sites
Ask two instructors to teach the same workflow and you’ll get two versions. Self-paced simulation gives everyone the same one. CHU Montpellier now shares its lessons with the eight centers in its regional hospital group, and local medical students can start on them before they ever join the staff.
Privacy
A playground and a simulation both keep learners out of real charts. Screenshots are the risky format, since one that slips through review can carry patient details straight into your LMS. Even with good tooling, have your compliance team look at the process before anything ships.
Cost
License price alone will mislead you. Classrooms carry trainers, rooms, and backfill for clinical shifts. Environments carry IT labor. Simulation has its own costs, licensing and authoring time among them. Run all of them against your real headcount and upgrade calendar, because the answer for a 300-bed hospital won’t match the answer for a 20-hospital system.
How Much of This Should You Believe?
Fair question, since a vendor wrote this. The customer results above are real outcomes at specific organizations, but they aren’t controlled trials, and we don’t know of an independent study that pits Assima against each of these tools. Your staff and your build will differ.
A bad curriculum also stays bad in any format. Put a muddled class into a simulation and you’ve built a muddled simulation, just with nicer clicking.
What we’d claim is narrower. If you’ve already designed solid, role-specific training, simulation makes it easier to deliver and much easier to keep up to date. Don’t take our word for it, though. Pilot it with your own people on one of your own workflows.
When Traditional Tools Are the Better Choice
Clones capture the interface, which means they can’t show you how your configured EHR behaves when an order fires or decision support kicks in. For build validation and integration testing you need a real environment. Keep one.
You also still need people. An experienced educator can sense a room going sideways, pick out the workflow that’s actually broken, and talk a skeptical charge nurse around. Software doesn’t do that. And nobody should go through their first live shifts without someone nearby.
Some hospitals go further and rehearse whole visits, with volunteer patients following scripts while trainers watch how providers use the EHR in the room. That teaches something a software simulation can’t, namely how to keep eye contact with a patient while charting.
If you’re a small practice on a stable system, you may not need a platform like ours at all. Assima earns its cost when you have scale, frequent change, and privacy pressure at the same time.
Putting the Mix Together
We’d stop asking which tool wins and go workflow by workflow instead. The sequence below is roughly how we’d approach it.
Start with what people really do
Job descriptions miss things. The nurse who handles admissions overnight because the clerk has gone home needs that workflow too, and you’ll only find out by asking. Once you have the list, sort it by how often each task happens and how badly a mistake could hurt a patient. Rare and risky comes first.
Give each workflow a home
Repeatable system skills belong in simulation. Save class time for judgment calls and the conversation about why things are changing. Technical teams and power users can keep the real environment. Before any of this starts, agree on what “ready” means, and pick measures leadership will still care about after go-live, like task accuracy or help desk demand.
Think about month 13
This is the step that gets dropped. By the end of year one the go-live team has moved on, new hires have arrived, and an upgrade or two has landed. Short follow-up sessions help. So does putting answers inside the workflow: Assima In-App Search surfaces training content in the live application, so a nurse can look something up without leaving the task or calling the help desk.
Bring us one workflow that worries you. We’ll show you how Assima could sit alongside the classes, environments, and super users you already rely on.
Frequently Asked Questions
Let’s Answer Some of Your Questions.
Usually it’s some blend of instructor-led classes, a live EHR training environment, screenshots and videos in an LMS, and super users on the floor. Few hospitals rely on just one. They all have a place, but they ask very different things of you. Some eat clinician time, some eat IT time, and some go stale the moment the vendor ships an update. It’s worth knowing which cost you’re paying before you add another tool.
For some jobs, yes. If you want hundreds of nurses practicing a set workflow and you want to see where they slip, simulation is the easier route, and there’s far less to maintain. A live environment wins when you need your real configuration, as in build validation or integration testing. Many health systems will end up with both, using simulation for most end users and a smaller environment for technical staff.
Much of it, but we wouldn’t drop the classroom entirely. CHU Montpellier replaced three hours of class with 40 minutes of distance learning. Zuyderland took a different route, using simulation to prepare nurses so class time could shrink and focus on questions. Either way, people still need somewhere to talk through what’s changing and why. The click-by-click material is what you can safely move out, along with most refreshers, since clinicians can do those between shifts.
Assima captures interface objects, not your source code or database, and learners practice away from production. Authors can replace sensitive data across a set of lessons in a few clicks, so nobody has to scrub screens one at a time. That said, a tool can’t be your compliance program. Ask your privacy team to review how captures are done and to check the finished content against your own policies before anything goes out to staff.
Assima says it works with HTML-based applications and has worked with EHRs including Epic, Cerner, and Orbis. Cerner is now Oracle Health, and you should confirm support for your exact version and deployment during evaluation. On the LMS side, Assima supports all SCORM versions. You can also use a dynamic link, which keeps learners on the latest lesson without someone having to upload a new package after each lesson update.
Pick your criteria first and hold every option to them: realism, role-specific workflows, PHI exposure, time away from care, update effort, readiness data, and total cost, with backfill and IT labor counted. Then skip the scorecards and run a pilot on one high-risk workflow. Compare error patterns, time to competency, and help desk demand against what you do now. Your own staff will tell you more than any vendor comparison can, this one included.